TM 55-1520-240-23-5
6-66
REMOVE COMBINING TRANSMISSION FORWARD OUTPUT SHAFT OIL SEAL
6-66
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powertrain Repairer’s Tool Kit, NSN
5180-00-003-5267
1/4-28 Bolt, At Least One Inch Long (2)
Materials:
None
Personnel Required:
Aircraft Powertrain Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Aft Pylon Doors Open (Task 2-2)
Aft Pylon Lower Fairing Open (Task 2-2)
No. 7 Drive Shaft Removed (Task 6-4)
Combining Transmission Forward Adapter Assembly
Removed (Task 6-5)
1.
Remove four nuts (1) and washers (2) from
retainer (3).
2.
Install two 1/4-28 bolts (4) in holes (5). Turn bolts
to jack retainer (3) off transmission (6).
3.
Remove packing (7) from retainer (3).
6-253
