TM 55-1520-240-23-3
4-12
ASSEMBLE POWERPLANT
(Continued)
4-12
23.
Position and install hose (44). Remove tag from
hose (44).
24.
Position hose (54) on powerplant (1) and install
six clamps (55). Install two screws (56) and nuts
(57). Install screw (58). Remove tag.
25.
Install serviceable gasket (59) on starter drive
housing. Position hose (54) on housing (60)
and install two nuts (61) and two washers (62).
Remove tag and tape.
4-99