TM 55-1520-240-23-3
4-12
ASSEMBLE POWERPLANT
(Continued)
4-12
2.
Install sling (3) as follows:
a.
Connect two cables (4) to forward fittings (5)
on starter drive housing (6).
b.
Connect cable (7) to aft fitting (8) on
powerplant (1).
c.
Adjust sling (3) until eye (9) is over aft hole
(10) in sling bar (11).
d.
Install pin (12) through bar (11).
3.
Connect hoist (13) to eye (9) of sling (3).
Powerplant is heavy and can injure
personnel if it drops. Personnel must
stay clear when powerplant is raised.
4.
Raise hoist (13) to lift powerplant (1) and prepare
powerplant for installation on trailer adapter
(2) (TM 55-2840-254-23 without 74 , TM
1-2840-265-23 with 74 ).
4-94