TM 55-1520-240-23-10
14-15
REMOVE CABLE CUTTER
(Continued)
14-15
7.
If cable is installed in cutter, push in lockpin (7)
and remove locknut (8). Pull down guard (9) and
push cable cutter (10) forward. Remove cable
(11).
Use care when handling cartridges.
Injury to personnel could result if
cartridge fires.
8.
If cable cutter will be stowed, pull down guard
(9). Remove cartridge (12).
8.1.
Place serviceable cartridge in a protective
container. Tag container with helicopter serial
number and cartridge installation date for quick
reference.
9.
Push in lockpin (7) and remove locknut (8).
10.
Remove two screws (13), nuts (14), and four
washers (15). Remove cable cutter (10).
11.
Lightly coat cable cutter (10) with lubricating oil
(E250) using cloths (E135).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
14-48