TM 55-1520-240-23-9
11-244
REMOVE AFT FUSELAGE CONNECTING LINKS
(Continued)
11-244
NOTE
Attaching bolts, washers, and nuts will
be temporarily installed after removing
links and bellcranks.
NOTE
If a crack in the connecting link or
bellcrank is suspected during removal,
refer to TM 1-1520-253-23.
1.
Tag left side connecting link (1).
2.
Remove cotter pin (2), nut (3), two washers
(4), and bolt (5) from connecting link (1) and
bellcrank (6).
3.
Remove connecting link (1) from bellcrank (6).
Install bolt (5), two washers (4), and nut (3) in
bellcrank.
4.
Tag right side connecting link (7).
5.
Remove cotter pin (8), nut (9), two washers (10),
and bolt (11) from bellcrank (12) and connecting
link (7).
6.
Remove connecting link (7) from bellcrank (12).
Install bolt (11), two washers (10), and nut (9)
in bellcrank.
11-951
