TM 55-1520-240-23-9
11-209
INSTALL LCT CONNECTING LINK ROD END BEARING (AVIM)
11-209
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 100 to 750 Inch-Pounds
Crowfoot Attachment, 1 Inch
Vise, Soft Jaws
Materials:
Lockwire (E231)
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 1-1520-253-23
TM 55-1520-240-23P
Task 11-208
NOTE
Procedure is same to install rod end
bearing in forward LCT connecting link
(414C3056-4) and aft LCT connecting
link (414C3056-3).
Rod end bearing (114CS118-2)
is used for connecting link
(414C3056-4).
Rod end bearing (114CS123-1)
is used for connecting link
(414C3056-3).
NOTE
If a crack in the connecting link is
suspected during removal, refer to TM
1-1520-253-23.
1.
Install checknut (1) and spring tension clip (2)
on rod end bearing (3).
2.
Clamp connecting link (4) in vise (5). Install rod
end bearing (3) in link (4).
11-829