TM 55-1520-240-23-9
11-207
REMOVE FORWARD LCT CONNECTING LINK
(Continued)
11-207
2.
Remove cotter pin (7), nut (8), and washer (9).
3.
Support yoke (10) and remove bolt (11) and
washer (12) connecting actuator (13) to yoke.
4.
Hold connecting link (5) and carefully lower yoke
(10).
5.
Cut and remove five cable straps (14) attaching
link cable (15) to yoke (10).
6.
Remove cotter pin (16), nut (17), and washer
(18).
7.
Hold connecting link (5) and remove bolt (19)
and washer (20).
8.
Remove connecting link (5) from yoke (10).
9.
Remove three cable clamps (21) attaching link
cable (15) to rear bulkhead (22).
10.
Disconnect link connector (23) from cruise guide
signal conditioner (24).
11.
Cut strap as required. Remove connecting link
(5) from helicopter.
11-825
