TM 55-1520-240-23-9
11-188
REMOVE FIRST STAGE MIXING ASSEMBLY
(Continued)
11-188
11.
Remove cotter pin (34), nut (35), washers (36),
and bolt (37). Disconnect roll link (38) from
bellcrank (17). Install bolt, washers, and nut in
bellcrank.
12.
Remove cotter pin (39), nut (40), washers (41),
and bolt (42). Disconnect yaw link (43) from
bellcrank (44). Install bolt, washers, and nut in
bellcrank.
TO REMOVE PITCH/THRUST AND ROLL/YAW
BELLCRANKS
13.
Remove cotter pin (45), nut (46), washers (47),
and bolt (48). Disconnect upper inboard link (49)
from bellcrank (11). Install bolt, washers, and nut
in bellcrank.
14.
Remove cotter pin (50), nut (51), washers (52),
and bolt (53). Disconnect upper outboard link
(54) from bellcrank (22). Install bolt, washers,
and nut in bellcrank.
15.
Remove cotter pin (55), nut (56), washers (57),
and bolt (58). Disconnect lower inboard link
(59) from pitch/thrust bellcrank (11). Install bolt,
washers, and nut in bellcrank.
16.
Remove cotter pin (60), nut (61), washers (62),
and bolt (63). Disconnect lower outboard link
(64) from roll and yaw bellcrank (22). Install bolt,
washers, and nut in bellcrank.
11-749
