TM 55-1520-240-23-9
11-187
INSTALL MIXING LINKAGE CONNECTING LINKS
(Continued)
11-187
INSTALL PITCH AND THRUST LEFT OUTPUT LINK
40.
Remove nut (86), washers (87 and 88), and bolt
(89) from bellcrank (56).
41.
Position pitch and thrust left output link (90) in
bellcrank (56). Install bolt (89), washers (88 and
87), and nut (86). Do not torque nut at this time.
Remove tag.
42.
Remove nut (91), washers (92 and 93), and bolt
(94) from bellcrank (41).
43.
Position link (90) in bellcrank (41). Install bolt
(94), washers (93 and 92), and nut (91). Do not
torque nut at this time.
INSTALL ROLL AND YAW LINK
44.
Remove nut (95), washers (96 and 97), and bolt
(98) from bellcrank (99).
45.
Position roll and yaw link (100) in bellcrank (99).
Install bolt (98), washers (97 and 96), and nut
(95). Do not torque nut at this time. Remove tag.
46.
Remove nut (101), washers (102 and 103), and
bolt (104) from bellcrank (11).
47.
Position link (100) in bellcrank (11). Install bolt
(104), washers (103 and 102), and nut (101). Do
not torque nut at this time.
11-743
