TM 55-1520-240-23-9
11-163.2
ADJUST DIFFERENTIAL AIRSPEED HOLD (DASH) ACTUATOR (AVIM)
(Continued)
11-163.2
9.
Connect ground wire (1) from supply (2) to pin
(8) of receptacle (3) of actuator (4).
10.
Set supply (2) to OFF.
11.
Connect positive wire (5) from supply (2) to pin 2
of receptacle (3).
12.
Connect negative wire (6) from supply (2) to pin
3 of receptacle (3).
13.
Measure distance A between surface (12) and
end of piston (7) of actuator (4).
14.
Set supply (2) to ON. Check movement of
piston (7). Piston shall fully extend in 3.5 to 6.0
seconds. Piston movement shall be smooth.
15.
Measure distance B between surface (12) and
end of piston (7).
16.
Subtract distance A of step 13 from distance B
of step 15. Result shall be between 0.66 to 0.72
inch.
11-667
