TM 55-1520-240-23-9
11-160
DISASSEMBLE PITCH CCD ACTUATOR (AVIM)
(Continued)
11-160
3.
Tag and unsolder three wires (8) from transformer
(9).
4.
Remove two nuts (10) and washers (11)
from transformer (9) and studs (12). Remove
transformer.
5.
Remove two screws (13) and washers (14) from
board (15). Remove board from chassis (7).
Heat screw heads. Use soldering gun.
6.
Tag and unsolder three wires (16) from terminal
board (15).
7.
Remove two screws (17) and washers (18) from
board (19). Remove board from chassis (7).
Heat screw heads. Use soldering gun.
8.
Tag and unsolder two wires (20) from terminal
board (19).
9.
Tag and unsolder seven wires (21) from
receptacle (3).
10.
Remove two screws (1) and washers (2) from
receptacle (3). Remove receptacle. Heat screw
heads, Use soldering gun.
11.
Remove screw (22) and washer (23) from bracket
(24).
12.
Remove two screws (25) and washers (26) from
bracket (24) and chassis (7). Remove bracket.
13.
Remove bearing (27) from bracket (24).
14.
Remove two screws (28), washer (29), terminal
lug (30), clamp (31), bracket (32), and magnet
(33) from chassis (7). Heat screw heads. Use
soldering gun.
15.
Loosen two setscrews (34) in disk (35). Remove
disk.
11-652
