TM 55-1520-240-23-9
11-87
REMOVE COCKPIT CONTROL TRANSFER BELLCRANKS
(Continued)
11-87
REMOVE THRUST TRANSFER BELLCRANK
17.
Tag thrust ILCA connecting link (28) thrust idler
connecting link (29), thrust transfer connecting
link (30), and thrust transfer bellcrank (31).
18.
Remove three cotter pins (32), nuts (33), six
washers (34), and three bolts (35) from bellcrank
(31).
19.
Disconnect three links (28, 29, and 30) from
bellcrank (31). Tie links away from bellcrank.
Use twine (E433).
20.
Install three bolts (35), six washers (34), and
three nuts (33) in bellcrank (31).
21.
Tie bellcrank (31) to hold bellcrank in position.
Use twine (E433).
22.
Pull shaft (17) with shaft puller (APP E-38) (18)
until bellcrank (31) is free. Untie and remove
bellcrank.
REMOVE PITCH TRANSFER BELLCRANK
23.
Tag pitch idler connecting link (36), pitch DASH
actuator (37), pitch transfer link (38), and pitch
transfer bellcrank (39).
24.
Remove three cotter pins (40), nuts (41), six
washers (42), and three bolts (43) from bellcrank
(39).
25.
Disconnect two links (36 and 38) and actuator
(37) from bellcrank (39). Tie links and actuator
away from bellcrank. Use twine (E433).
26.
Install three bolts (43), six washers (42), and
three nuts (41) in bellcrank (39).
27.
Tie bellcrank (39) to hold bellcrank in position.
Use twine (E433).
28.
Pull shaft (17) with shaft puller (APP E-38) (18)
until bellcrank (39) is free. Untie and remove
bellcrank.
11-465
