TM 55-1520-240-23-9
11-87
REMOVE COCKPIT CONTROL TRANSFER BELLCRANKS
(Continued)
11-87
Do not allow bellcrank to drop;
otherwise, damage to components
can occur.
NOTE
If a crack in the bellcrank or support
is suspected during removal, refer to
TM 1-1520-253-23.
REMOVE YAW TRANSFER BELLCRANK
1.
Tag yaw ILCA connecting link (1), yaw idler
connecting link (2), yaw transfer connecting link
(3), and yaw transfer bellcrank (4).
2.
Remove three cotter pins (5), nuts (6), six
washers (7) and three bolts (8) from bellcrank (4).
3.
Disconnect three links (1, 2, and 3) from
bellcrank (4). Tie links away from bellcrank. Use
twine (E433).
4.
Install three bolts (8), six washers (7), and three
nuts (6) in bellcrank (4).
5.
Remove cotter pin (9), nut (10), two washers
(11), and bolt (12) from support (13).
6.
Remove cotter pin (14), nut (15), and two
washers (16) from shaft (17).
11-463