TM 55-1520-240-23-9
11-87
REMOVE COCKPIT CONTROL TRANSFER BELLCRANKS
(Continued)
11-87
7.
Install shaft puller (APP E-38) (18) on shaft (17).
8.
Tie bellcrank (4) to hold bellcrank in position.
Use twine (E433).
9.
Pull shaft (17) until bellcrank (4) is free. Untie
and remove bellcrank.
10.
Remove spacer (19) from support (13).
REMOVE ROLL TRANSFER BELLCRANK
11.
Tag roll idler connecting link (20), roll ILCA
connecting link (21), roll transfer connecting link
(22) and bellcrank (23).
12.
Remove three cotter pins (24), nuts (25), six
washers (26), and three bolts (27) from bellcrank
(23).
13.
Disconnect three links (20, 21, and 22) from
bellcrank (23). Tie links away from bellcrank.
Use twine (E433).
14.
Install three bolts (27), washers (26), and nuts
(25) in bellcrank (23).
15.
Tie bellcrank (23) to hold bellcrank in position.
Use twine (E433).
16.
Pull shaft (17) with shaft puller (APP E-38) (18)
until bellcrank (23) is free. Untie and remove
bellcrank.
11-464