TM 55-1520-240-23-9
11-6.2
CHECK CONTROLS FOR OVERALL LOOSENESS
(Continued)
11-6.2
11.
Working from aft right work platform, attach scale
(1) to bolt (9) of aft right bellcrank (10).
12.
Have helper pull scale (1) down until scale
indicates 10 pounds. Measure distance ‘E’
between bolt (9) and surface (11) at WL 90.75.
13.
Have helper pull scale (1) up until scale indicates
10 pounds. Measure distance ‘F’ between bolt
(9) and surface (11).
14.
Subtract distance ‘E’ from distance ‘F’. Result
shall be less than 0.375 inch. If more, perform
Tasks 11-7, 11-7.1, and 11-9, then 11-6.3.
15.
Remove scale (1) from bolt (9).
16.
Working from aft left work platform, repeat steps
11 thru 15 at bolt (12) of aft left bellcrank (13).
INSPECT
FOLLOW-ON MAINTENANCE:
Connect forward and aft servocylinder connecting
links (Task 11-193).
Remove servocylinder safety blocks (T31) (Task
11-29).
Perform operational check of flight control system
(TM 55-1520-240-T).
Close forward and aft work platforms (Task 2-2).
END OF TASK
11-24
