TM 55-1520-240-23-9
11-75
DISASSEMBLE PILOT’S COCKPIT CONTROL ASSEMBLY
(Continued)
11-75
REMOVE ROLL AND THRUST TRANSFER
BELLCRANKS
81.
Remove cotter pin (229), nut (230), two washers
(231), and bolt (232) from support (191).
82.
Remove two bushings (233) from shaft (234).
83.
Slide shaft (234) from bellcrank (165) to release
bellcrank (180). Remove spacer (235) and
bellcrank (180) from support (191).
84.
Remove shaft (234), bushing (236), and bellcrank
(165).
DISASSEMBLE ROLL TRANSFER BELLCRANK
85.
Remove two bearings (237) and four bushings
(238) from bellcrank (180).
DISASSEMBLE THRUST TRANSFER BELLCRANK
86.
Remove two bearings (239) and four bushings
(240) from bellcrank (165).
REMOVE PITCH TRANSFER BELLCRANK
87.
Remove cotter pin (241), nut (24), two washers
(243), and bolt (244) from support (245).
88.
Remove bellcrank (148) and two bushings (246)
from support (245).
DISASSEMBLE PITCH TRANSFER BELLCRANK
89.
Remove two bearings (247), spacer (248), and
four bushings (249) from bellcrank (148).
11-345
