TM 55-1520-240-23-9
11-75
DISASSEMBLE PILOT’S COCKPIT CONTROL ASSEMBLY
(Continued)
11-75
REMOVE ROLL INPUT BELLCRANK
71.
Remove cotter pin (204), nut (205), two washers
(206), and two bolts (207) from support (191).
72.
Remove bellcrank (186) from support (191).
DISASSEMBLE ROLL INPUT BELLCRANK
73.
Remove seven bushings (208), retainer (209),
and nut (210) from bellcrank (186).
REMOVE THRUST INPUT BELLCRANK
74.
Remove cotter pin (211), nut (212), two washers
(213), and bolt (214) from fitting (215).
75.
Remove bellcrank (175).
DISASSEMBLE THRUST INPUT BELLCRANK
76.
Remove two bushings (216).
77.
Remove two bearings (217), spacer (218), and
four bushings (219) from bellcrank (175).
REMOVE THRUST IDLER BELLCRANK
78.
Remove cotter pin (220), nut (221), two washers
(222), and bolt (223) from support (224).
79.
Remove bellcrank (159), and two bushings (225)
from support (224).
DISASSEMBLE THRUST IDLER BELLCRANK
80.
Remove two bearings (226), spacer (227), and
four bushings (228) from bellcrank (159).
11-344
