TM 55-1520-240-23-9
11-75
DISASSEMBLE PILOT’S COCKPIT CONTROL ASSEMBLY
(Continued)
11-75
60.
Remove cotter pin (176), nut (177), two washers
(178), and bolt (179) from bellcrank (180).
61.
Tag and disconnect roll connecting link (181)
from bellcrank (180).
62.
Remove cotter pin (182), nut (183), two washers
(184), and bolt (185) from bellcrank (186).
Remove link (181).
REMOVE YAW BELLCRANK
63.
Remove cotter pin (187), nut (188), two washers
(189), and bolt (190) from support (191).
64.
Tag and remove yaw bellcrank (139) from
support (191) through access (192).
DISASSEMBLE YAW BELLCRANK
65.
Remove two bearings (193) and spacer (194)
from bellcrank (139).
66.
Remove six bushings (195) from bellcrank (139).
67.
Remove two bushings (196) from support (191).
REMOVE PITCH AND ROLL INPUT BELLCRANK
68.
Remove cotter pin (197), nut (198), two washers
(199), and bolt (200) from bellcrank (186) in
support (191).
69.
Remove socket (154) from bellcrank (186).
DISASSEMBLE PITCH AND ROLL INPUT
BELLCRANK
70.
Remove two bearings (201), two bushings (202),
and spacer (203) from socket (154).
11-343
