TM 55-1520-240-23-9
11-47
RIG ROLL, YAW OR THRUST ILCA INPUT CONNECTING LINKS
(Continued)
11-47
15.
Install pin (1) through hole (2) in fitting (3), four
bellcranks (4, 5, 6, and 7), and fitting (8). Pin
must slide freely.
16.
Remove pin (1) from fitting (3).
INSPECT
FOLLOW-ON MAINTENANCE:
Remove servocylinder safety blocks (T31) (Task
11-29).
Remove transfer bellcrank rig pin (Task 11-46).
Remove hydraulic power.
Remove electrical power.
Install closet backup panel (Task 2-2).
Install closet acoustic blanket (Task 2-108).
END OF TASK
11-199
