TM 55-1520-240-23-9
11-275
DISASSEMBLE AFCS COMPUTER UNIT (CONTROL BOX) (AVIM)
(Continued)
11-275
13.
Remove wire harness (53) by disconnecting
connector (54) from base circuit card (55).
14.
Remove base circuit card (55) by removing eight
screws (56).
15.
Remove choke (57) as follows:
a.
Tag and unsolder two wires (58) from choke
(57).
b.
Remove nut (59) and screw (60)
16.
Remove transformer (61) by unsoldering 20 pins
(62) at bottom of base circuit card (55), and lug
(63).
17.
Remove capacitor (64) by removing braided tape
(65), turn card (55) over, and unsolder two leads
(66).
11-1056