TM 55-1520-240-23-9
11-271
ASSEMBLE AFCS CONTROL PANEL (AVIM)
(Continued)
11-271
Cathode of diode must be positioned
correctly; otherwise, component will
malfunction.
1.
Install four diodes (1) on printed circuit board (2).
Use soldering iron and heat sinks.
2.
Connect and solder wires (3) on printed circuit
board (2). Remove tags.
3.
Install printed circuit board (2) on connector
bracket (4) by installing four screws (5), standoffs
(6), and nuts (7). Use sealant (E345) on screws
and nuts.
4.
Connect wires (8) to connectors (9 and 10). Use
contact insertion/removal tool. Remove tags.
5.
Install two connectors (9 and 10) in connector
bracket (4). Position keyways (11) up.
6.
Install eight screws (12) and nuts (13). Use
sealant (E345) on screws and nuts.
11-1028