TM 55-1520-240-23-8
10-82
INSTALL AFT TANK FUEL LEVEL SHUTOFF VALVE
(Continued)
10-82
Two snap rings must be positioned at
upper end of elbow where it connects
to tee. Be sure flanges of snap rings
are together. Damage to parts can
occur if installation is not as shown.
19.
Remove plugs from adapter (31), elbow (32),
and tee (19).
20.
Install elbow (32) with the two snap rings on
tee (19). Tighten coupling (34) on tee. Install
lockwire (E233) (35).
21.
Position gasket (21) on adapter (31). Slide
adapter aft and install four bolts (36), washers
(37), and nuts (38). Tighten coupling (39).
INSPECT
METHOD USING VALVE 114PS494-2 AND ELBOW
ASSEMBLY 401545-1 WITH 11
22.
Position tube (1) on fuel valve (2). Make sure two
hose connections (3) are at top and tube points
down. Install four bolts (4), washer (5).
Breakaway fitting (8) is fragile. Handle
with care.
23.
Position packing (7) on fitting (8). Position fitting
on valve (2). Install four bolts (9) and washers
(10).
10-389