TM 55-1520-240-23-8
10-82
INSTALL AFT TANK FUEL LEVEL SHUTOFF VALVE (Continued)
10-82
7.
Remove plugs from adapter (16), elbow (17),
and tee (18).
8.
Position adapter (16) and elbow (17) on tee (18).
NOTE
Gaskets (20.1) P/N BACG10BS32
are used with shutoff valve (21) P/N
AV16B2101D-1.
9.
Position three gaskets (20), two gaskets (20.1)
coated with sealant (E342.1), valve (21), and
spacer (22) on fitting (8).
10.
Slide adapter (16) aft. Secure adapter. Use four
bolts (23), washers (24), and nuts (25). Tighten
coupling (26) and bolts.
11.
Connect electrical connector (27).
INSPECT
Go to Follow-On Maintenance.
METHOD USING VALVE 114PS494-1 AND ELBOW
ASSEMBLY 401116-3 (WITHOUT 11 )
12.
Perform steps 1 and 2.
13.
Install packing (11) in fuel valve (2).
14.
Remove barrier material and tape from hole in
tank (12). Maneuver fuel valve (2) partly into
tank.
15.
Connect two hoses (13).
16.
Install ten bolts (14) and washers (15).
NOTE
Gaskets (21.1) P/N BACG10BS32
are used with shutoff valve (22) P/N
AV16B2101D-1.
17.
Position tube (27), three gaskets (21), two
gaskets (21.1) coated with sealant (E342.1),
spacer (23), and valve (22) on fitting (8). Secure
parts loosely with four bolts (28), washers (29),
and nuts (30).
18.
Connect electrical connector (16).
10-388
Change 1
