INSTALL FORWARD FUEL TANK VENT VALVE
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Procedure is same to install vent valve
on No. 1 or No. 2 forward fuel tank.
Installation of No. 2 (right) vent valve
is shown here.
Remove barrier material and tape covering
forward hole (1) in tank (2). Remove tape residue
from tank. Use dry cleaning solvent (E162) and
cloths (E135). Wear goggles to protect eyes.
Wear gloves (E186).