TM 55-1520-240-23-8
10-68
INSTALL FORWARD TANK FUEL LINES AND ELECTRICAL WIRING
(Continued)
10-68
15.
Remove barrier material and tape from three
holes in tank (52). Clean tape residue from
tank. Use dry cleaning solvent (E162) and cloths
(E135). Wear goggles to protect eyes. Wear
gloves (E186).
16.
Have helper, from inside tank, push three
receptacles (53) through holes in tank (52).
Install three locknuts (54) on receptacles. Install
lockwire (E227).
17.
Connect three electrical connectors (55). Install
lockwire (E227).
INSPECT
FOLLOW-ON MAINTENANCE:
Install fuel tank boost pump (Task 10-70).
Perform vent system pressure test (Task 10-117).
Raise and install forward fuel tank (Task 10-26).
Install fuel quantity transmitter (Task 8-82).
Test forward fuel tank (Task 10-27).
Perform vent system flow test (Task 10-118).
Perform test of pressure refueling system (Task
10-119) and fuel feed system (Task 10-120).
Refuel helicopter (Task 1-51).
Bleed fuel system (Task 10-121).
Perform operational check of appropriate fuel system
(TM 55-1520-240-T).
END OF TASK
10-341
