TM 55-1520-240-23-8
10-66
INSTALL FORWARD OR AFT FUEL TANK VENT ASSEMBLY
(Continued)
10-66
5.
Remove tags and position tube (12) and clamp
(13). Install screw (14), washer (15), and spacer
(16).
6.
Position clamp (17) and spacer (18). Install
screw (19) and washer (20).
7.
Remove tags and position hose (21) and ring
(22). Connect hose connectors (23 and 24).
8.
Position clamp (25). Install screw (26) and
washer (27).
9.
On aft tank only, position hose clamp (28) and
two hose clamps (29 and 30).
10.
Install screw (31), washer (32) and nut (33).
11.
Remove tags and position hose (34). Position
ring (22) at each end of hose. Connect hose
connectors (35 and 36).
12.
Position two clamps (37). Install two screws (38)
and washers (39).
13.
Remove tags and position pipe assembly (40).
Connect hose connector (41).
14.
Position clamps (42 and 43). Install screw (44),
washer (45), and nut (46).
15.
Position clamps (47 and 48). Install screw (49),
washer (50), and nut (51).
16.
Position clamps (52 and 53). Install screw (54),
washer (55), and nut (56).
10-328
