TM 55-1520-240-23-810-55.3INSTALL EXTENDED RANGE FUEL SYSTEM (ERFS II) REFUELING HOSEASSEMBLY(Continued)10-55.31.Remove nuts (1) washers (2), and bolts (3).2.Remove blanking plate (19), with gasket (5), fromthe flange of cross fitting (6).3.Position the gate valve (8) with gasket (15)against airframe fitting (12).4.Position the upper flange of hose (4) with gasket(16) against the valve (8).5.Install four bolts (13) and washers (20) throughthe hose flange and the body of the valve (8).6.Request that helper, working in the cabin,position packings (18), spacer (17) and flange(10) of coupling (11) over the four bolts andagainst the airframe fitting (12) and gasket (15).7.Have helper install washers (20) and nuts (9).8.Position the bottom flange of hose (4), withgasket (5) on the flange of cross fitting (6).9.Install four bolts (3), washers (2), and nuts (1).10.Install electrical connector (7) on gate valve (8).FOLLOW-ON MAINTENANCE:Close forward left landing gear access panel (Task2-2).END OF TASK10-280
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
