TM 55-1520-240-23-8
10-43
REMOVE MAIN FUEL TANK VENT ASSEMBLY
(Continued)
10-43
NOTE
Procedure is same to remove No. 1 or
No. 2 main fuel tank vent assembly.
Removal of No. 1 (left) vent assembly
is shown here.
1.
Disconnect hoses (1 and 2) from tee (3). Plug
hoses and cap tee.
2.
Disconnect hose (4) from drain valve (5). Tag
and remove hose. Plug hose and cap valve.
3.
Remove two screws (6) and washers (7) securing
clamps (8) to tank cell (9).
4.
Remove screw (10), washer (11), and nut (12)
only if vent tube (13) will be removed from vent
(14).
5.
Disconnect hose (1) from vent tube (13). Tag and
remove hose. Plug hose and cap tube.
5.1.
If required, remove and plug tube (13).
10-216
