TM 55-1520-240-23-7
9-143
DISASSEMBLE POWER STEERING CONTROL BOX (AVIM)
(Continued)
9-143
23.
Tag and unsolder two wires (53).
24.
Remove two screws (54) and nuts (55). Remove
resistor (56).
25.
Remove two screws (57) and nuts (58). Remove
bracket (59) and potentiometer (60).
26.
Remove nut (61) and washer (62). Remove
potentiometer (60) from bracket (59).
27.
Tag and unsolder three wires (63) from terminals
(64).
28.
Remove two screws (65) and nuts (66). Tag and
unsolder six wires (67). Remove two resistors
(68).
29.
Tag and remove 16 wires (69) from connector
(70). Use contact tool.
30.
Remove five nuts (71). Remove plate assembly
(72). Remove five spacers (73) and screws (74).
31.
Tag and unsolder wire (75) from diode (76).
9-573
