TM 55-1520-240-23-7
9-137
INSTALL PITCH AND ROLL CONTROL STICK GRIP
(Continued)
9-137
5.
Remove tape from end of wires (4). Clean all
contact pins (8) with dry cleaning solvent (E162)
and cloth (E120). Wear goggles to protect eyes.
Wear gloves (E186).
6.
Insert 15 contact pins (8) into plug (9). Use
inserter/extractor tool. Match letter on wire to
letter on connector.
7.
Install backshell (7) on plug (9).
8.
Install two screws (10) in backshell (7).
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-545
