TM 55-1520-240-23-7
9-123.2
INSTALL OVERHEAD PANEL TRANSFORMERS AND RELAY
(Continued)
9-123.2
RELAY
1.
Plug relay (1) into socket on mounting bracket on
overhead panel (2). Install three washers (3) and
screws (4) in relay and standoff (5).
2.
Deleted.
TRANSFORMERS
NOTE
Procedure is same to install either
transformer.
3.
Position transformer (6) on panel (2). Install four
washers (7) and screws (8) in transformer.
4.
Remove tape from three wires (9). Connect
wires to transformer (6). Install screws (10) and
washers (11). Remove tags.
5.
Raise panel (2). Install two washers (12) and
bolts (13) in panel.
FOLLOW-ON MAINTENANCE:
Perform operational check (TM 55-1520-240-T).
END OF TASK
9-472