TM 55-1520-240-23-7
9-39
REMOVE MAIN CURRENT TRANSFORMER
(Continued)
9-39
NOTE
Procedure is same to remove main
current transformer from either power
distribution panel (PDP). Left hand
No. 1 PDP is shown here.
1.
Loosen six fasteners (1). Open panel (2).
2.
Disconnect electrical connector (3).
3.
Remove three nuts (4) and washers (5).
Disconnect three wires (6). Pull wires down
through hole in transformer (7).
4.
Tag wires (6). Wrap ends of wires. Use tape
(E385).
5.
Remove four nuts (8), washers (9), and bolts
(10). Remove transformer (7).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-124