TM 55-1520-240-23-7
9-27
INSTALL BATTERY
9-27
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Apron
Face Shield
Materials:
Rubber Gloves
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
Wear rubber gloves, apron, and
face shield when handling batteries.
The potassium hydroxide in the
battery electrolyte is very corrosive.
If any electrolyte is spilled on your
clothing, hands, or on other material,
immediately flood the affected area
with cold water or boric acid solution.
Consult a physician if your eyes are
affected.
1.
Position battery (1) on shelf (2) within two
brackets (3) and two brackets (3.1).
2.
Position two clamps (4) on battery (1). Tighten
clamps.
9-79