TM 55-1520-240-23-7
8-106
INSTALL COPILOT’S INSTRUMENT PANEL
(Continued)
8-106
16.
Position TB1 (41) on panel (1). Install two screws
(42) and nuts (43). Install module directly above
each nut.
17.
Remove tags and insert three wires (44) and two
wires (45) through holes in panel (1).
18.
Install three wires (44) in module (46) and
two wires (45) in module (47). Use contact
insertion/removal tool.
19.
Install five wires (44 and 45) in wire harness (48).
Position wire harness on panel (1).
20.
Install five clamps (49) with five screws (50).
21.
Without 17 , reach behind panel (1) and connect
wire (51) to each postlight assembly (52).
22.
With 17 , reach behind panel (1) and screw wire
(51) to each postlight assembly (52).
INSPECT
FOLLOW-ON MAINTENANCE:
Install radar altimeter (TM 11-1520-240-23).
Install turn and slip indicator (Task 8-45).
Install flange mounted instruments on copilot’s panel
(Task 8-91).
Install clamp mount instruments on copilot’s panel
(Task 8-89).
Install clock (Task 8-93).
Install emergency panel light (Task 8-4).
Perform operational check of affected systems (TM
55-1520-240-T).
END OF TASK
8-346
