TM 55-1520-240-23-7
8-106
INSTALL COPILOT’S INSTRUMENT PANEL
(Continued)
8-106
10.
Place washer (26) and nut (27) on wire (28).
11.
Thread wire (28) through tube (29) and slide tube
through panel (1) into clamps (30).
12.
Install washer (26) and nut (27) on tube (29).
Tighten screws (31) on clamps (30).
13.
Install nut (32) and knob (33) on wire (28).
14.
Position two clips (34) on panel (1). Install two
screws (35). Install light (36) between two clips.
Make sure light plugs into socket (37).
14.1.
With 17 , position filter cap (37.1) on panel (1).
Install screw (37.2) and nut (37.3).
NOTE
Helicopters without 17 have two light
fixtures on copilot’s panel. Helicopters
with 17 have four light fixtures.
14.2.
Install each light fixture (37.4) by threading wire
(37.5) through hole in panel (1). Install two
screws (37.6). Splice wire behind panel (TM
55-1500-323-25).
15.
Position switch (38) in panel (1). Install washer
(39) and nut (40).
8-345
