TM 55-1520-240-23-7
8-106
INSTALL COPILOTS INSTRUMENT PANEL
(Continued)
8-106
2.
Position rheostat (5) in panel (1). Install washer
(6) and nut (7) on rheostat.
3.
Remove tape and connect three wires (8) to
rheostat (5). Remove tags.
4.
Position socket (9) in panel (1). Install washer
(10) and nut (11) on socket.
5.
Remove tape and connect wire (12) to socket
(9). Tighten screw (13).
6.
Position panel (14 or 14.1). Install two screws
(15).
7.
Without 17 , install lamp (16) and lens (17) in
socket (9).
8.
Turn rheostat shaft (18) to left. Position knob (19)
on shaft so pointer (20) is on DIM. Tighten two
setscrews (21).
9.
Position pad (22) on panel (1). Install seven
screws (23), 14 washers (24), and seven nuts
(25).
8-344