TM 55-1520-240-23-7
8-100
REMOVE HYDRAULIC MAINTENANCE PANEL COMPONENTS
(Continued)
8-100
10.
Remove wire harness as follows:
a.
Remove lockwire. Remove two nuts (47) from
wire harness receptacles (48).
b.
Pull receptacles (48) out of panel (9).
c.
Remove five screws (49) and washers (50)
from five clamps (51).
d.
Remove wire harness (52) from panel (9).
e.
Remove five clamps (51) from wire harness
(52).
NOTE
Procedure is the same to remove
five terminal board module mounting
tracks. Removal of TB-2 is shown
here.
11.
Remove mounting track TB-2 is as follows:
a.
Remove two screws (53) and washers (54)
from mounting track (46).
b.
Tag and remove mounting track (46).
8-317