TEST AND ADJUST FUEL QUANTITY INDICATOR USING PSD 60-1AF FUEL QUANTITY TEST SET (Continued)

TEST AND ADJUST FUEL QUANTITY INDICATOR USING PSD 60-1AF FUEL QUANTITY TEST SET (Continued) - TM-55-1520-240-23-7_259

TEST AND ADJUST FUEL QUANTITY INDICATOR USING PSD 60-1AF FUEL QUANTITY TEST SET (Continued) - TM-55-1520-240-23-7_261

TM-55-1520-240-23-7 CH-47D Heilcopter Manual
Page Navigation
234

TM 55-1520-240-23-7 8-80.5.1 TEST AND ADJUST FUEL QUANTITY INDICATOR USING PSD 60-1AF FUEL QUANTITY TEST SET (Continued) 8-80.5.1 46. Adjust TU vernier (V-1) to read 1592.2 pf on tester LCD display (Figure 23). NOTE This capacitance value equals two main tanks at 2200 lb each for total of 4400 lb. 47. Rotate FUNCT switch (S-2) on tester to SIM TU & COMP. 48. Adjust "F" trimmer marked "T" on back of fueling panel gauge to read 7800 lb on gauge. 49. In cockpit, turn REFUEL STATION ON-OFF switch on Fuel Control Panel to OFF. 50. Adjust "F" trimmer marked "" on gauge until total reads "7800". 51. Repeat steps 18 thru 24. 52. Readjust "E" trimmer marked "" if necessary to read "0000" on gauge. 53. Turn Refuel Station ON-OFF switch ON. 54. Readjust "E" trimmer marked "T" on refueling panel gauge, if necessary, to read "0000". 55. Remove electrical power. 56. Reinstall gauge in instrument panel. Refer to Task 8-80.5, step 12. 57. At refueling panel, reinstall gauge in panel. Refer to Task 8-80.5, step 12. 8-244

Privacy Statement
Press Release
Contact