TM 55-1520-240-23-7
8-60
INSTALL COMBINING NO. 1 OR NO. 2 ENGINE TRANSMISSION OIL PRESSURE
TRANSDUCER
(Continued)
8-60
NOTE
Installation of No. 1 and No. 2
engine and combining transmission
oil pressure transducers is similar.
Electrical disconnect is at bottom
of engine transmission transducers
and at top of combining transmission
transducer. Installation of No. 2
engine transmission oil pressure
transducer is shown here.
1.
Clean bonding surfaces of transducer (1) and
mount surface (2) (TM 55-1500-325-25). Use
cloth (E120).
2.
Position transducer (1) on mount surface (2).
Install four bolts (3) and washers (4).
3.
Connect hose (5) to transducer (1).
4.
Connect connector (6) to transducer (1).
INSPECT
FOLLOW-ON MAINTENANCE:
Close aft pylon doors (Task 2-2).
Perform operational check (TM 55-1520-240-T).
END OF TASK
8-175
