TM 55-1520-240-23-7
8-59
REMOVE COMBINING NO. 1, OR NO. 2 ENGINE TRANSMISSION OIL PRESSURE
TRANSDUCER
8-59
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Container, 2 Quart
Materials:
Cloth (E120)
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
Aft Pylon Doors Open (Task 2-2)
NOTE
Removal of No. 1 and No. 2 engine
and combining transmission oil
pressure transducers is similar.
Electrical disconnect is at bottom
of engine transmission transducers
and at top of combining transmission
transducer. Removal of No. 2 engine
transmission oil pressure transducer
is shown here.
1.
Disconnect hose (1) from transducer (2). Use
container and cloths (E120) for spilled oil.
2.
Disconnect electrical connector (3) from pressure
transducer (2).
3.
Remove four bolts (4) and washers (5).
4.
Remove pressure transducer (2).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
8-173
