TM 55-1520-240-23-7
8-44.1
REMOVE TURN AND SLIP INDICATOR — PILOT’S OR COPILOT’S INSTRUMENT PANEL
8-44.1
INITIAL SETUP
Applicable Configurations:
With 17 or 69
Tools:
Electrical Repairer’s Tool Kit, NSN 5180-00-323-4915
Materials:
None
Personnel Required:
Aircraft Electrician
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power
Hydraulic Power Off
NOTE
Procedure is same for removing pilot’s
or copilot’s turn and slip indicator.
1.
Reach up under instrument panel (1) and
disconnect wire harness connector (2) from
indicator (3).
2.
Remove four screws (4) and nuts (5).
If light fixture is not supported, internal
connection to power wire could be
damaged.
NOTE
Do not cut or disconnect wire to light
fixture.
3.
Remove light fixture (6) from indicator (3).
Support fixture.
8-132
