TM 55-1520-240-23-7
8-45
INSTALL TURN AND SLIP INDICATOR IN PILOTS OR COPILOTS INSTRUMENT
PANEL (Continued)
8-45
2.
Install mounting plate (2) on indicator (1). Make
sure screw holes of indicator and mount plate
are aligned and that wide section of mount plate
is up.
3.
Hold second mount plate (3) in place behind
instrument panel (4), wide section of mount plate
down.
4.
Install indicator (1) and first mount plate (2) in
instrument panel (4).
5.
Install two short screws (5) and clips (6). Make
sure turned down end of clip is at top.
6.
Install two nuts (7).
8-135