TM 55-1520-240-23-7
8-37
ADJUST AIRSPEED INDICATOR RESTRICTOR
(Continued)
8-37
Primer (E299) is flammable and toxic.
It can irritate skin and cause burns.
Use only with adequate ventilation,
away from heat or open flame. Avoid
contact with skin, eyes, or clothing.
In case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
for eyes.
4.
Apply primer (E299) to thread of setscrew hole
(1). Do not get primer in spline socket of setscrew
(3). Allow primer to dry at room temperature for
30 minutes. Wear gloves (E186).
Sealant (E340) can irritate skin and
cause burns. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
5.
Apply sealant (E340) to setscrew hole (1). Wear
gloves (E186).
6.
Test restrictor (2) (Task 8-35). Elapsed time must
be 3.5 to 4 seconds.
INSPECT
7.
Cure sealant (E340) for 24 hours.
8.
Test restrictor (2) (Task 8-35) after 24 hour cure
time. Elapsed time must be 3.5 to 4 seconds.
INSPECT
FOLLOW ON MAINTENANCE:
None
END OF TASK
8-121
