TM 55-1520-240-23-7
9-164.4
DISASSEMBLE FUEL PRE-CHECK PANEL
(Continued)
9-164.4
REMOVE FLOODLIGHT
13.
Disconnect wire (23).
14.
Remove two nuts (24), washers (25), and screws
(26).
15.
Remove light (27).
REMOVE TERMINAL BOARD
NOTE
Procedure is similar to remove two
terminal boards. Removal of terminal
board TB1 is shown here.
16.
Tag and disconnect 10 wires (28) from terminal
board TB1 (29). Use a heat sink.
17.
Remove four nuts (30), washers (31), screws
(32), and spacers (33). Remove terminal board
(29).
9-659