TM 55-1520-240-23-7
9-164.4
DISASSEMBLE FUEL PRE-CHECK PANEL
9-164.4
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairer’s Tool Kit, NSN 5180-00-323-4915
Contact Insertion/Removal Tool, M83723-31-20
Heat Sink
Materials:
Tags (E264)
Tape (E385)
Personnel Required:
Aircraft Electrician
Equipment Condition:
Off Helicopter Task
1.
Remove four screws (1) and washers (2) and
remove cover (3).
REMOVE SWITCH
NOTE
Procedure is same to remove nine
toggle switches. Removal of LH FUEL
CELL SHUTOFF VALVE switch is
shown here.
2.
Tag six wires (4). Use tags (E264).
3.
Disconnect six wires (4) by removing three
screws (5) and washers (6).
9-656
