TM 55-1520-240-23-7
9-153
ASSEMBLE DUAL HOOK RELAY BOX (AVIM)
(Continued)
9-153
NOTE
Procedure is same to install all three
lights. Installation of one light is
shown here.
16.
Install light (30) and nut (31) in box (27).
17.
Install lens (32).
18.
Position tubing (33) on wires (34). Use shrinkable
tubing (E431).
19.
Solder three wires (34) to light (30). Use solder
(E360). Remove tags.
20.
Slide tubing (33) over terminals (35). Shrink
tubing with heat gun.
21.
Repeat steps 16 thru 20 for other three lights
(30).
9-622