TM 55-1520-240-23-7
9-153
ASSEMBLE DUAL HOOK RELAY BOX (AVIM)
(Continued)
9-153
7.
Position insulators (11 and 12) and terminals
boards (13 and 14).
8.
Install six screws (15) and nuts (16).
9.
Solder 51 wires (17) to terminal boards (13 and
14). Use solder (E360). Remove tags.
INSPECT
NOTE
Procedure is same to install all six
relays. Installation of one relay is
shown here.
10.
Position relay (18) in bracket (19). Install three
screws (20), washers (21), and nuts (22).
11.
Position tubing (23) on wires (24). Use shrinkable
tubing (E431).
12.
Solder six wires (24) to relay (18). Use solder
(E360). Remove tags.
13.
Slide tubing (23) over relay pins (25). Shrink
tubing with heat gun.
14.
Repeat steps 10 thru 13 for other five relays (18).
15.
Position two relay brackets (19 and 26) and
clamp (10) in box. Install nine screws (28) and
nuts (29).
9-621