TM 55-1520-240-23-6
7-242
ASSEMBLE ACCUMULATOR (1356-643887M1) (AVIM)
(Continued)
7-242
4.
Install piston (2) in shell (5).
5.
Install packing (7) on flange (8) of retainer (9).
NOTE
End caps are marked HYD and GAS.
6.
Position retainer (9) in center of HYD cap (10),
packing (7) toward cap. Install two screws (11).
Torque screws to 12 inch-pounds.
7.
Lockwire two screws (11). Position lockwire
around port (12). Use lockwire (E227).
8.
Install packing (13) on flange (14) of retainer (15).
9.
Position retainer (15) in center of GAS cap (16),
packing (13) toward cap. Install two screws (17).
Torque screws to 12 inch-pounds.
10.
Lockwire two screws (17). Position lockwire
around port (18). Use lockwire (E227).
INSPECT
7-905
