TM 55-1520-240-23-6
7-241
DISASSEMBLE AND INSPECT ACCUMULATOR (1356-643887M1)(AVIM)
(Continued)
7-241
10.
Remove four rings (15) and packing (16) from
piston (13).
11.
Measure outside diameter of piston (13) at six
lands (17). Diameter shall not be less than
1.854+.000/-.002 inches.
12.
If nameplate (18) is damaged or shell (2) is to
be replaced, remove nameplate and strap (18).
Use heat gun.
13.
Measure inside diameter of shell (2). Diameter
shall not be more than 1.859+.002/-.000 inches.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-900