TM 55-1520-240-23-6
7-241.1
DISASSEMBLE AND INSPECT ACCUMULATOR (08-8421-020) (AVIM)
(Continued)
7-241.1
5.
Push piston (9) from cylinder (4). Use rod (10)
and arbor press.
6.
Remove two rings (11), packing (12), and
bearing (13) from piston (9).
7.
Measure outside diameter of piston (9) at lands
(14 and 15). Diameter of land (14) shall not be
less than 1.818 inches: diameter of lands (15)
shall not be less than 1.837 inches.
8.
Remove screw cap (3) and shoulder ring (16)
from each end of cylinder (4) by sliding screw
cap (3) down cylinder until shoulder ring (16)
releases.
7-902
